MC浇铸尼龙板|高韧性耐疲劳|齿轮齿条传动件用
100% match- Flame rating V-0 ✓
Item-by-item check against your criteria
| Long-term Working Temperature | 115 | — |
|---|---|---|
| Flammability | V-0 | ✓ |
Achieving V-0 costs toughness, chemical resistance and money. This page lists V-0 candidates and explains when a flame-retardant grade is actually required - and when it is not.
UL94 V-0 is the flame requirement most often written on drawings for electrical and electronic structural parts. Flame-retardant grades achieve it with additives, at the cost of lower toughness, reduced chemical resistance, higher price and, for some additive systems, less stable long-term electrical properties.
This page lists the materials and stock shapes rated V-0 in our catalogue. The decision order should be: first confirm the end-product certification actually requires V-0; then check whether the part sits near a heat source or a high-voltage circuit; only then compare strength, temperature rating and cost among the qualifying candidates.
| Long-term Working Temperature | 115 | — |
|---|---|---|
| Flammability | V-0 | ✓ |
| Long-term Working Temperature | 115 | — |
|---|---|---|
| Flammability | V-0 | ✓ |
| Long-term Working Temperature | 250 | — |
|---|---|---|
| Flammability | V-0 | ✓ |
| Long-term Working Temperature | 250 | — |
|---|---|---|
| Flammability | V-0 | ✓ |
| Long-term Working Temperature | 170 | — |
|---|---|---|
| Flammability | V-0 | ✓ |
| Long-term Working Temperature | 170 | — |
|---|---|---|
| Flammability | V-0 | ✓ |
| Long-term Working Temperature | 310 | — |
|---|---|---|
| Flammability | V-0 | ✓ |
| Long-term Working Temperature | 310 | — |
|---|---|---|
| Flammability | V-0 | ✓ |
| Long-term Working Temperature | 220 | — |
|---|---|---|
| Flammability | V0 | ✓ |
| Long-term Working Temperature | 220 | — |
|---|---|---|
| Flammability | V0 | ✓ |
| Long-term Working Temperature | N/A | — |
|---|---|---|
| Flammability | V-0 | ✓ |
| Long-term Working Temperature | N/A | — |
|---|---|---|
| Flammability | V-0 | ✓ |
Your selection criteria: Flame rating V-0
or contact us directly32 products match this condition. To filter by your specific parameters, use the Full Material Selector →
All three require self-extinguishing after removal of the flame. They differ in afterflame time and whether dripping ignites cotton: V-0 has the shortest afterflame and no igniting drips, V-1 is slightly looser, and V-2 permits igniting drips. Strictness decreases in that order.
Choose FR PC for cost-sensitive structural and cosmetic parts; choose PPS where chemical resistance, high temperature or greater dimensional stability is needed. PPS is inherently flame retardant, usually without added flame retardants, so long-term electrical performance is more stable.
UL rates flame performance by thickness. The same grade may reach V-0 at 0.8 mm and only HB at 3 mm. For thin-wall parts, verify the rating at your actual thickness rather than relying on the grade name.